• Microwave/PIR Technology
  • Microwave Advanced Processing (MAP)
  • The use of dual technology provides the best detection available while virtually eliminating false alarms and costly service calls.
  • Built-in Diagnostics and Supervision
  • Ceiling Mount Design
  • 360o field-of-view, mounting height from 2.4m to 4.9m, install as recessed or surface mount.
  • Microcontroller-initiated Self-tests Microcontroller automatically initiates self-tests at power-up, trouble conditions and programmed intervals..
  • Patented INFORMER® circuit constantly monitors microwave and PIR against blockage and misapplication.
  • Independent circuit supervises both microwave and PIR against failure; at a loss of signal, microcontroller initiates self-test and unit switches automatically to single technology operation.C24
  • Surface or flush mount on ceilings (flush mount kit included); maximum standard range obtained at 3.4m. PIR mirror assembly included for installation on 3.7m to B214.9m ceilings.
Categories: , SKU: Ceiling mount DUAL TEC® motion sensor.

Additional Information


15m diameter, 7.6m radius

Detection zones

– With 2.4/3.4m mirror : 360o, 36 long range, 24 intermediate, 16 lower, 1 down – With 3.7/4.9m mirror : 360o, 40 long range, 20 intermediate, 1 down

PIR sensitivity

2 – 4 Steps within field of view


24.200GHz (K-Band)

Mounting height

2.4/3.4m or 3.5/4.8m depending on mirror installed

Power requirements

10 – 14.5VDC, 40 mA typical

Alarm relay

Form A (NC) / 125mA@25 VDC, max. 22 Ohm, protective resistor

Ceiling and cover tamper

Form A (N.C.) switch rated 25 mA, 30 VDC

Operating Temperature

-18oC to +65oC

Temp. compensation

Advanced dual slope

Relative humidity

5% – 95% non condensing

RF Immunity

30 V/m from 10MHz to 1000 MHz

PIR White Light Immunity

900 Lux (typical at 3m)


127 mm x 127 mm x 58 mm (h x w x d)




PD6662:2010, EN50131-1-4 Grade 2


There are no reviews yet, would you like to submit yours ?

Be the first to review “DT7360UK”